HomeMy WebLinkAboutResponse to Comments 10222517. Per City Rev. Code 31-403 the Department requires street lighting plans to be submitted to
the Department for review and approval before filing and recording of the final plat for the
subdivision. The street lighting plans required shall include conduit and pull/junction box
locations, street luminaire locations and mounting heights, wire sizes, current photometric data
for the proposed fixtures, and subdivision street photometrics using the proposed fixtures that
meet AASHTO Roadway Lighting Design Guide standards.
Response of comment- Street lighting plans will be prepared and submitted to the Department
for review and approval prior to filing the final plat, in accordance with City Code 31-403 and
AASHTO lighting standards.
Development Staff Comment Response:
1. Provide revised preliminary plat document incorporating highlighted information on attached
preliminary plat checklist.
a) A vicinity map shall be filed. It shall cover an area within a radius of one-half mile of the
proposed subdivision at a scale of one(1) inch to two thousand(2,000) feet. The drawing shall
generally locate arterial street, highways, section lines, railroads, roads, parks and other
significant community facilities; and if possible, shall be incorporated on the preliminary plat.
Response of comment- A vicinity map meeting the specified requirements has been added to
the preliminary plat.
b) The storm drainage preliminary analysis drainage data for all watercourse entering and
leaving the plat boundaries.
Response of comment- Drainage data for all watercourses entering and leaving the plat
boundaries have been included in the preliminary drainage analysis in the drainage report.
c) Preliminary storm drainage plan incorporating proposed easement dimensions and typical
ditch sections.
Response of comment- Information has been added to the drainage report.
d) For residential plats, names of owners of unplatted tracts abutting the proposed subdivision
and the names of all owners of platted tracts in excess of two and one-half acres
Response of comment- Names of owners abutting the subdivision and of platted tracts
exceeding 2.5 acres have been added to the plat.
e) A phasing plan outlining the boundaries for each phase
The project will not be developed in phases; therefore, a phasing plan is not applicable.
2. Label all front platted building lines on plat.
Response of comment- All front platted building lines have been labeled on the revised plat.