HomeMy WebLinkAboutHDC2014-025 Project Background And Descripion 09-08-2014DEPARTMENT OF PLANNING AND DEVELOPMENT
723 West Markham Street
Little Rock, Arkansas 72201-1334
Phone: (501) 371-4790 Fax: (501) 399-3435
STAFF REPORT
ITEM NO. One.
DATE: September 8, 2014
APPLICANT: Joe Joyner, Little Rock Violin Shop, Inc -
ADDRESS: 316E 11th Street
COA REQUEST: Sign
PROJECT BACKGROUND AND DESCRIPTION:
The subject property is located at 316 East 11 th Street.
The property's legal description is "Lot 7, Block 45,
Original City of Little Rock, Pulaski County, Arkansas."
The building at 316 East 11th Street is a ca. 1900-1910
Garage building and is considered a "Contributing
Structure" to the MacArthur Park Historic District in the
latest survey. (A previous staff report listed the use of
the building as originally built as a stable for the grocery
store at 1020 Rock.)
This application is for a sign on the front of the building
over the garage doors.
W
'fir" i C
5 v
C.
s �
z �
p
i
�p
i
e u
a �
PREVIOUS ACTIONS ON THIS SITE: '67y' XF
On August 18, 2014, a COC was issued to repair the LLocation
front left window sash.
On April 21, 2014, a COC was issued to replace the side of Project
alley door.
On April 11, 2011, a COA was issued for repointing the mortar and a door on the east side of
the building.
On September 22, 2006, a COC was issued to Jay Core of the replacement of the front garage
door.
On March 13, 2002, a COA was approved and issued to Jay Core for an addition to the rear of
the structure.
On January 2, 1985, a COA was not approved for Lester Gaines for an alteration to the front of
the building.
Page 1 of 5
PROPOSAL AND WRITTEN ANALYSIS OF THE APPLICATION BASED OFF OF INTENT
AND GUIDELINES:
This site was the subject of a Conditional Use Permit (CUP) for violin sales and repair which
was approved on May 19, 2011. That CUP approved a sign on the front of the building upon
review and approval of the HDC. This application is to get approval of that sign.
The Guidelines state on page 71 under Design Guidelines for Site Design:
E. SIGNS
Signs should be subordinate to the architecture and overall character throughout
the district. Historic signs should be preserved, including "ghost" signs on the
sides of buildings.
1. Attached to Building:
Signs attached to a building should not cover or obscure architectural features.
Signs may be painted on windows, doors, or small panels at entrances or on
awnings. Small signs may be flush -mounted on a building wall; may be hung on
porches between posts; or may project from the structure. A sign on a masonry
wall should be mounted in the mortar, not the masonry.
3. Materials for signs:
Materials used for signs should be traditional, such as finished wood, glass,
copper, or bronze, not plywood, plastic, unfinished wood, neon or other internally
lighted materials, or flashing lights. Materials should be compatible with the
building materials.
4. Design of signs:
The design of the signs should be appropriate to the building, in size, lettering,
and style. Business logos or symbols are desirable. If several businesses share
a building, coordinate the signs. Flashing, rotating, moveable, or portable signs
Page 2 of 5
should not be used.
5. Lighting of signs:
Lighting of signs should be from remote sources, preferably from the ground
aimed directly at the sign and shielded from street view. Lighting should not use
visible bulbs, internal sources or luminous paint.
The sign will be 8' x 2' long. It will be metal individually cut letters that will be set of the wall by
1/2". The letters will be black. Underneath the words, there will be a violin bow that completes
the business logo. This sign does not obscure architectural details of the building. Care should
be taken when installing the sign to get the most mounting holes drilled into the mortar and not
into the actual brick. The design of the sign is appropriate to the size of the building. The sign
will not be lit at night. His office hours end at 6:00 pm.
NEIGHBORHOOD COMMENTS AND REACTION: At the time of distribution, there were no
comments regarding this application.
STAFF RECOMMENDATION: Approval with the following conditions:
1. Obtaining sign permit.
Page 3 of 5
DEPARTMENT OF PLANNING AND DEVELOPMENT
723 West Markham Street
Little Rock, Arkansas 72201-1334
Phone: (501) 371-4790 Fax: (501) 399-3435
STAFF REPORT
ITEM NO. One.
DATE: September 8, 2014
APPLICANT: Joe Joyner, Little Rock Violin Shop, Inc.
ADDRESS: 316E 11th Street
COA REQUEST: Sign
PROJECT BACKGROUND AND DESCRIPTION:
The subject property is located at 316 East 11th Street.
The property's legal description is "Lot 7, Block 45,
Original City of Little Rock, Pulaski County, Arkansas."
The building at 316 East 11th Street is a ca. 1900-1910
Garage building and is considered a "Contributing
Structure" to the MacArthur Park Historic District in the
latest survey. (A previous staff report listed the use of
the building as originally built as a stable for the grocery
store at 1020 Rock.)
This application is for a sign on the front of the building
over the garage doors.
PREVIOUS ACTIONS ON THIS SITE: fa'
On August 18, 2014, a COC was issued to repair the _m
front left window sash.
On April 21, 2014, a COC was issued to replace the side I. Location of Project
alley door.
On April 11, 2011, a COA was issued for repointing the mortar and a door on the east side of
the building.
On September 22, 2006, a COC was issued to Jay Core of the replacement of the front garage
door.
On March 13, 2002, a COA was approved and issued to Jay Core for an addition to the rear of
the structure.
On January 2, 1985, a COA was not approved for Lester Gaines for an alteration to the front of
the building.
Page 2 of 7
PROPOSAL AND WRITTEN ANALYSIS OF THE APPLICATION BASED OFF OF INTENT
AND GUIDELINES:
This site was the subject of a Conditional Use Permit (CUP) for violin sales and repair which
was approved on May 19, 2011. That CUP approved a sign on the front of the building upon
review and approval of the HDC. This application is to get approval of that sign.
The Guidelines state on page 71 under Design Guidelines for Site Design:
E. SIGNS
Signs should be subordinate to the architecture and overall character throughout
the district. Historic signs should be preserved, including "ghost" signs on the
sides of buildings.
1. Attached to Building:
Signs attached to a building should not cover or obscure architectural features.
Signs may be painted on windows, doors, or small panels at entrances or on
awnings. Small signs may be flush -mounted on a building wall, may be hung on
porches between posts; or may project from the structure. A sign on a masonry
wall should be mounted in the mortar, not the masonry.
3. Materials for signs:
Materials used for signs should be traditional, such as finished wood, glass,
copper, or bronze, not plywood, plastic, unfinished wood, neon or other internally
lighted materials, or flashing lights. Materials should be compatible with the
building materials.
4. Design of signs:
The design of the signs should be appropriate to the building, in size, lettering,
and style. Business logos or symbols are desirable. If several businesses share
a building, coordinate the signs. Flashing, rotating, moveable, or portable signs
should not be used.
5. Lighting of signs:
Lighting of signs should be from remote sources, preferably from the ground
Page 3 of 7
aimed directly at the sign and shielded from street view. Lighting should not use
visible bulbs, internal sources or luminous paint.
The sign will be 8' x 2' long. It will be metal individually cut letters that will be set of the wall by
1/2". The letters will be black. Underneath the words, there will be a violin bow that completes
the business logo. This sign does not obscure architectural details of the building. Care should
be taken when installing the sign to get the most mounting holes drilled into the mortar and not
into the actual brick. The design of the sign is appropriate to the size of the building. The sign
will not be lit at night. His office hours end at 6:00 pm.
NEIGHBORHOOD COMMENTS AND REACTION: At the time of distribution, there were no
comments regarding this application.
STAFF RECOMMENDATION: Approval with the following conditions:
1. Obtaining sign permit.
COMMISSION ACTION: September 8, 2014
Brian Minyard made a presentation to the Commission.
Commissioner Randy Ripley commented that it was a tasteful sign and asked Mr. Joe Joyner,
the applicant if it was aluminum. Mr. Joyner replied that it was cast aluminum.
Commissioner Page Wilson asked the applicant if he would like to light his sign. Mr. Joyner
said no.
Commissioner Kwadjo Boaitey made a motion to approve the COA as submitted with Staff
recommendations. Commissioner BJ Bowen seconded and the motion passed with a vote of 6
ayes and 1 open position.
Page 4 of 7