Loading...
HomeMy WebLinkAboutSec. 31-877/28/22, 12:13 PM LRLIC MUUK, r+rc %,UUtl v1 a Sec. 31-87. - Application form. o 5/ The following information is to be included as supplements In ormation to the preliminary plat package. These criteria may be submitted in an information format as part of the cover letter and shall be filed with the required plat materials. They are: (1) Proposed name and type of subdivision. (2) Name and address of land owner with source of title. (Deed record book and page or instrument number required.) (3) Name and address of subdivider. (4) Linear feet of internal streets. (5) Average size of lots and minimum lot size. (6) Number of lots. (7) Applicable existing covenants, and the proposed covenants on the land. (8) Proposed source of water supply. (9) Proposed means of wastewater disposal. (10) Request for variances, waivers, or deferrals. (Completion of variance and waiver request form required.) (11) Date of plat survey. (Code 1961, § 37-18(a); Ord. No. 15,529, § 1e, 8-16-88; Ord. No. 15,988, § 4, 12-18-90; Ord. No. 16,861, § 1(aa), 3-21-95; Ord. No. 18,031, § 1(z), 6-1-99) Sec. 31-88. -Vicinity map. A vicinity map shall be filed. It shall cover an area within a radius of one-half mile of the proposed subdivision at a scale of one (1) inch to two thousand (2,000) feet. The drawing shall generally locate arterial streets, highways, section lines, railroads, schools, parks and other significant community facilities; and, if possible, shall be incorporated on the preliminary plat. (Code 1961, § 37-18(b)) Sec. 31-89. - Preliminary plat. A preliminary plat shall be submitted in the number of copies as established by the planning staff. it shall be clearly and legibly drawn and shall be submitted in a format as directed by the planning staff. Plat scale shall be one (1) inch equals fifty (50) feet for plats up to and including ten (10) acres and one (1) inch equals one hundred (100) feet for plats larger than ten (10) acres, except where a smaller scale may be deemed appropriate by the staff. The preliminary plat shall be identified by the name of the subdivision, and shall 116 about:blank 7/28/22, 12:13 PM LILLIU MULA, AR �Uuc ul —un ml include all information listed below. The preliminary plat shall also be submitted in an electronic format compatible with equipment in the department of planning and development of the city. Data shall be in Computer -Aided Design (CAD) compatible .DXF or .DWG (compatible with software available in the department of planning and development of the city) format containing the information listed below: (1) Contours shown at intervals of not more than five (5) feet for terrain with an average slope exceeding ten (10) percent or more, and at an interval of two (2) feet for terrain with slopes less than ten (10) percent. The source of the contours along with the source from which all elevations were derived shall be clearly described. (2) Proposed design including streets, alleys and sidewalks with proposed street names, lot lines with approximate dimensions, service easements, land to be reserved or dedicated for public uses and land to be used for purposes other than residential. (3) Minimum building front yard setback lines for commercial or office, industrial, mobile home park and residential subdivisions, and all setback lines for zero -lot -line, apartment and townhouse development. (4) Natural features within and surrounding proposed subdivision including drainage channels, bodies of water, wooded areas and other significant features. On all watercourses leaving the tract, the direction of flow shall be indicated, and for all watercourses entering the tract, the drainage area above the point of entry shall be noted. (5) The storm drainage preliminary analysis showing drainage data for all watercourses entering and leaving the plat boundaries. The storm drainage analysis shall be prepared in sufficient detail to illustrate the proposed system's capability of accommodating storm events as 4- required by the stormwater management and drainage manual. jgy4rf0- (6) Date of survey, north point and graphic scale. (7) Any portion of property within the floodway or the one -hundred -year floodplain, based upon the federal insurance administration's national flood insurance program provided for and adopted by the city. (8) Features within and surrounding the proposed subdivision including existing and platted streets, bridges, culverts, utility lines, pipelines, power transmission lines, all easements, park areas, structures, city and county lines, section lines and other significant information. (9) Preliminary storm drainage plan incorporating proposed easement dimensions and typical ditch sections. Skr " e'" 10 j,-+ (10) Names of recorded subdivisions abutting the proposed subdivision, with plat book and page number or instrument number. (11) For residential plats, names of owners of unplatted tracts abutting the proposed subdivision and the names of all owners of platted tracts in excess of two and one-half (21/2) acres. 2/6 about:blank 7/28/22, 12:13 PM LI11l2 KUUK, r+lt %-.uuc ui viuuioi wc� (12) For commercial plats, names of owners of all land contiguous to the proposed subdivision. (13) The names of all owners of landlocked parcels contiguous to or within the plat boundaries. (14) Boundary survey information of the tract shall be as follows: a. Boundary lines shall be indicated by a heavy line. b. Adjusted bearings and distances shall be shown on all boundary lines and ties to all corners of record utilized. Where boundary lines are curves, sufficient curve data shall be provided to adequately describe the curve. As a minimum, curve data for each curve shall consist of radius, arc distance, delta angle and chord bearing and distance. Where boundary lines are common with previously platted properties, record bearings and distances shall also be shown. c. Accurate locations and adequate physical descriptions of all monuments shall be shown indicating size, type of material and construction thereof. d. Metes and bounds legal description of the tract boundary. (15) Zoning classifications within the plat and abutting areas. (16) Municipal boundaries that pass through or abut the subdivision. (17) Certifications that the plat has been surveyed and duly filed for record in the offices of the state surveyor and the county circuit clerk and recorder within the last seven (7) years. (18) A phasing plan outlining the boundaries for each phase. (Code 1961, § 37-18(d); Ord. No. 15,929, § 1(c—f), 9-4-90; Ord. No. 15,988, § 4, 12-18-90; Ord. No. 16,861, § 1(aa), (ss), 3-21-95; Ord. No. 18,031, § 1(j), (aa), 6-1-99; Ord. No. 18,902, § 1(m), 7-15-03; Ord. No. 21,867, § 1, 5-19-20) Sec. 31-90. - Engineering analysis. An engineering analysis containing the following information shall be filed: (1) At the option of the staff and where a street grade variance is being requested, the following information shall be provided: a. Street cross sections of all proposed streets at one -hundred -foot stations as follows: 1. On a line at right angles to the centerline of the street. 2. Elevation points shall be at the centerline of the street, each property line and points twenty-five (25) feet inside each property line. b. Street profiles showing existing and proposed elevations along centerlines of all roads drawn at a horizontal scale of one hundred (100) feet to the inch and a vertical scale of ten (10) feet to the inch, or as otherwise allowed by the public works department. Where 3/6 about:blank 7/28/22, 12:13 PM LRUtl nVUN, - • -- required, such profiles shall be prepared by an engineer registered to practice in the state. (2) An analysis of all stormwater conveyance for the one hundred -year storm event onto, within, and leaving the property to be provided to the staff for review. Such analysis shall be prepared by the engineer of record at owner's expense. The analysis shall determine to the best of the engineer's ability a safe building line, conveyance channels, and drainage easements, and it shall be clearly and legibly drawn on the preliminary plat. (Code 1961, § 37-18(e); Ord. No. 17,697, § 3d, 3-17-98; Ord. No. 21,867, § 1, 5-19-20) Sec. 31-91. - Certificates. Each preliminary plat submitted to the planning commission shall carry the following certificates as appropriate: CERTIFICATE OF PRELIMINARY SURVEYING ACCURACY I, , hereby certify that this plat correctly represents a boundary survey made or verified by me that all surveying requirements of the State of Arkansas and City of Little Rock Subdivision Rules and Regulations have been complied with and filed for record as required. Date of Execution Name Professional Surveyor No. Arkansas CERTIFICATE OF PRELIMINARY ENGINEERING ACCURACY I, , hereby certify that this plat correctly represents a plat made by me, and that engineering requirements of the Little Rock Subdivision Rules and Regulations have been complied with. Signed, 416 about:blank 7/28/22, 12:13 PM Date of Execution Little Rock, AR Code of Ordinances Name, Registered Engineer No. _, Arkansas CERTIFICATE OF PRELIMINARY PLAT APPROVAL All requirements of the Little Rock Subdivision Rules and Regulations relative to the preparation and submittal to a preliminary plat having been fulfilled, approval of this plat is hereby granted, subject to further provisions of said rules and regulations. This certificate shall expire Date Date of Execution Signed, Name, L.R. Planning Commission (Code 1961, § 37-18(e)(1); Ord. No. 15,929, § 1(g), 9-4-90; Ord. No. 16,341, § 1(qq), 1-19-93; Ord. No. 20,326, § 1(b), 9-21-10) Sec. 31-92. - Fees. Filing fees for preliminary plats shall be as established by ordinance. (Code 1961, § 37-18(e)(2)) Cross reference— Fees for subdivision applications, § 23-3. Sec. 31-93. - Bill of assurance. 5/6 about:blank V28122, 12 13 PM LI aie KOCK, AkM $,UU F7 UP VI U I I la 1l. The draft submitted shall use the format provided within the sample draft provided by staff. This format wiil ensure that the proposed bill of assurance separates those provisions required in the plat by ordinance and those provisions desired by the developer. (Code 1961, § 37-18(e)(3); Ord. No. 18,031, § 1(h), 6-1-99) 616 aboutblank