HomeMy WebLinkAboutZ-4411-J Map2'-2 3/4 "
2'-2 5/8"
(frame)
13'-0 1/2"
-0'-2 3/8" 4
Z-23/4" - 10'-7 112" 1.0
Color
TBD
FRONT ELEVATION
SI:ALE: 111"= 1'-U"
2'-2 3/4 "
1'-5 7/16"
J�L1 1/4" typ.
typ.
0'-2 5/8"
t V-4 -- —
8'-0 1/2"'- Power disconnect
switch
— 10'-7 1/2" -
-- 9'-10 5/32" — -
CABINET FRAME DETAIL
5GALE: 112"= 1'-0"
1" x 2" x 1/8" Alum.
rec. tube brace
Removable -
lift clip
Continuous
(sectioned) -
1/8" alum. lid
G "MEXICAN GRILL" RACEWAYS
w/ gasket
-
1/8" Alum. -
mounting flange and brake formed cross braces.
face
.090" alum. lid sits atop .040" lid mounting flanges
Heyco
and is attached w/ counter sunk screws into cross
cap
— -
LED controller
ACCESS= Removal of aluminum lid(s)
2 1/2" sq. tube frame
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of
w/ rectangular holes
3/8" Fasteners
cut in top for service
as req.
access
mounting flange
2 END VIEW 3/8" Fasteners as req.
1.0 SCALE: Removable lift clip
Continuous (sectioned)
1/8" alum. lid w. gasket
Continuous (sectioned) 1/8"
alum. lid w/ gasket
Power disconnect switch
Ends of 1/8" Alum.
face overhang frame
—
1/8" Alum. return @
corners/ends (glue to
face overhang)
2 1/2" x 2 1/2" x 1/8"
Alum. sq. tube frame
Mounting holes (typ.)
SPECIFICATIONS FOR (1) ILLUMINATED CHANNEL LETTER SIGN (42 SO. FT.)
0 CHANNEL LETTERS "CHIPOTLE" PEPPER LOGO and "MEXICAN GRILL"
G "MEXICAN GRILL" RACEWAYS
LETTER TYPE= Face -Lit pan channel letters
CONSTRUCTION= 1/8" brake -formed aluminum wl continuous top
DEPTH= 3"
mounting flange and brake formed cross braces.
FACES= Pepper Logo= 3/4" Clear acrylic w/ recessed graphics (see
.090" alum. lid sits atop .040" lid mounting flanges
sheet #1.2 for construction details)
and is attached w/ counter sunk screws into cross
All others= 3/16" Cyro #2447 Milk -White acrylic
braces. Seal and gasket raceway to make water tight.
TRIMCAP= 1" Brown Jewelite
ACCESS= Removal of aluminum lid(s)
BACKS= .040" Pre -finished white aluminum
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of
RETURNS= .040" Pre -finished Adobo Brown aluminum (w/ weep holes)
cross braces Attach 1/4" steel angle lift clips w/ 3/8" bolts
ILLUMINATION= White Agilite Thin Rayz LEDs
MOUNTING= Mount to existing fascia w/ 3/8 fasteners (as req.) through
MOUNTING= Mount to face of raceway with #10 Tek screws as req.
mounting flange
0 "CHIPOTLE" & PEPPER LOGO RACEWAY CABINETS
ELECTRICAL
FACE= 1/8" Aluminum- Attachment to frame via Versalok adhesive
PRIMARY= 120V electrical to sign and final hook up is by others (leave
Note: faces overhang ends of frame typ.
6'-0" pigtail out back of raceway typ.)
RETURNS= @ ends/corners- 1/8" Alum. spot weld and Versalok to face
BACK= .040" Alum.- Rivet or screw to back of frame as req.
SECONDARY= 12V LED wire leads jumped in raceway. 12V LED
FRAME= 2 1/2"x 1/8" Aluminum sq. tube w/ 1" x 2" x 1/8" alum. brace
transformers mounted in raceway (mount in top sq.
tube for "CHIPOTLE" and Pepper logo raceway
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of frame.
cabinet)
Attach 1/4" steel angle lift clips to top of cab. w/ 3/8" bolts
POWER DISCONNECT= Toggle switch on end of raceway/ raceway
MOUNTING= Mount to existing fascia w/ 3/8 lag bolts through face/ frame
cabinet
(Heyco plugs required in cabinet face)
NOTE: See sheet #1.1 for electrical details
Channel letter
w/ LEDs
1/8" alum. cross
brace- rivet/glue - .i)
to raceway
,040' alum. Flange-
rivet/glue to race 'J
way
Brake formed 1/8"
alum. raceway
LED controller
Power in, and final hookup
is by others typ.
Counter sunk screws
for attachment of
.090" alum. lid
Gasket req.
alum.
—{—
flange- rivet/
glue to race
way
Brake formed
1/8" alum.
raceway
� 1
Power
supply to
sign and
final hook
upis by
others typ
Channel -
letter tt
Raceway
cabinet
l
4 END SECTION
1.0 SCALE: 1 1/2"= V-0"
1/8" brake
formed alum.
cross brace-
rivet/glue to
raceway typ.
5 "MEXICAN GRILL" RACEWAY SECTION
1.0 NOT TO SCALE
COLOR SPECIFICATIONS
P1 P.T.M. PMS #484C "Roasted Red" (Nuance) NOTE: Paint all exposed
fasteners and Heyco caps
P2 P.T.M. PMS #4625C "Adobo Brown" (Nuance) to match adjacent finish
P3 P.T.M. Existing fascia- Exact color TBD
Advertising Concepts Inc
3725 Canal Drive,
Fort Collins, CO 80524
970 484 3637
www.adcon-signs.com
Thele documents arm plans haae ikon cfcigcd Cyano
an: th mlu%ive inkNccbLml p10lRrtydf Adcgn W Any
unajihor¢ed use, d SdWuro. OKspmrrciuon oi doph
cation of arry of the information contained herein may
result In liability under applicable laws
Design Proposal for.
Chipotle Mexican Grill
"Location"
Sign Type: A-1
Date: _
Drawn by: T Skip W.
Account Manager: Rob K.
Project Manager; _
Design/ Estimate #:
File Name: A -t
Client Approval
Signature
Date
NOTE: Please ensure all red line changes are noted on
(his drawing prior to returning it to ADCON Subsequent to
ADCON incorporating the red line changes requested on
this drawing any fuller changes will result in additional
hillino at the rate of $66 per hour.
❑ Approved
❑ Approved As Noted
❑ Revise And Resubmit
Noduclion Mgr. Approval Date
Projecl t4gr. Approval Dale
Account Mgr. Approval Date
P&D Mgr. Approval bate
Revision Notes:
Sea. No. 0 *TBD*
W.O. No. 0000000
Date:
Rev. No. l4 By:
Sheet No. 1.0
0'-2 3/8"
2' -2 3/4 " � ��,
Color--All-
TBD
olorP3 _
TBD
FRONT ELEVATION
SCALE: 1/2"= V-0"
2'-2 314 " - -
1'-5
2'-2 5/8'
(frame)
13'-0 112"
10'-7 1/2"
-s
4 0'-2 5/8"
1.0 Or -3o
Pi
V-2"
P3
- -- 10'-7 1/2"
-- - 9'-10 5/32" -
1 1/4" _1 1/4" typ. 2" 4 l 1" x 2" x 1/8" Alum-
typ, rec. tube brace
3 CABINET FRAME DETAIL
SCALE: 1/2"= V-0"
Removable
8" i
lift clip
r
_ — 8'_01/2" _
Power disconnect
switch
- -- 10'-7 1/2"
-- - 9'-10 5/32" -
1 1/4" _1 1/4" typ. 2" 4 l 1" x 2" x 1/8" Alum-
typ, rec. tube brace
3 CABINET FRAME DETAIL
SCALE: 1/2"= V-0"
Removable
0 CHANNEL LETTERS "CHIPOTLE", PEPPER LOGO, and "MEXICAN GRILL"
lift clip
LETTER TYPE= Face -Lit pan channel letters
Continuous
DEPTH= 3"
(sectioned)
FACES= Pepper Logo= 3/4" Clear acrylic w/ recessed graphics (see
1/8" alum. lid
w/ gasket
sheet #1.2 for construction details)
and is attached w/ counter sunk screws into cross
All others= 3/16" Cyro #2447 Milk -White acrylic
braces. Seal and gasket raceway to make water tight.
TRIMCAP= V Brown Jewelite
ACCESS= Removal of aluminum lid(s)
1/8" Alum.
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of
RETURNS= .040" Pre -finished Adobo Brown aluminum (w/ weep holes)
cross braces Attach 1/4" steel angle lift clips w/ 3/8" bolts
face
MOUNTING= Mount to existing fascia w/ 3/8 fasteners (as req.) through
MOUNTING= Mount to face of raceway with #10 Tek screws as req.
mounting flange
Heyco
ELECTRICAL
FACE= 1/8" Aluminum- Attachment to frame via Versalok adhesive
cap r
_�
V-0" pigtail out back of raceway typ.)
LED controller
SECONDARY= 12V LED wire leads jumped in raceway. 12V LED
2 1/2" sq. tube frame -
transformers mounted in raceway (mount in top sq.
w/ rectangular holes
3/8" Fasteners -
cut in top for service
access
as req.
2 END VIEW 3/8" Fasteners as req.
1.0 SCALE: Removable lift clip
t Continuous (sectioned)
_4 1/8" alum lid w. gasket �--T
-- Continuous (sectioned) 1/8"
alum. lid w/ gasket
Power disconnect switch
Ends of 1/8" Alum.
face overhang frame
1/8" Alum. return @
cornerslends (glue to
face overhang)
2 1/2" x 2 1/2" x 1/8"
Alum. sq. tube frame
Mounting holes (typ.)
Mm SPECIFICATIONS FOR (1) ILLUMINATED CHANNEL LETTER SIGN (42 SQ. FT.)
0 CHANNEL LETTERS "CHIPOTLE", PEPPER LOGO, and "MEXICAN GRILL"
0 "MEXICAN GRILL" RACEWAYS
LETTER TYPE= Face -Lit pan channel letters
CONSTRUCTION= 1/8" brake -formed aluminum w/ continuous top
DEPTH= 3"
mounting flange and brake formed cross braces.
FACES= Pepper Logo= 3/4" Clear acrylic w/ recessed graphics (see
.090" alum. lid sits atop .040" lid mounting flanges
sheet #1.2 for construction details)
and is attached w/ counter sunk screws into cross
All others= 3/16" Cyro #2447 Milk -White acrylic
braces. Seal and gasket raceway to make water tight.
TRIMCAP= V Brown Jewelite
ACCESS= Removal of aluminum lid(s)
BACKS= .040" Pre -finished white aluminum
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of
RETURNS= .040" Pre -finished Adobo Brown aluminum (w/ weep holes)
cross braces Attach 1/4" steel angle lift clips w/ 3/8" bolts
ILLUMINATION= White Agilite Thin Rayz LEDs
MOUNTING= Mount to existing fascia w/ 3/8 fasteners (as req.) through
MOUNTING= Mount to face of raceway with #10 Tek screws as req.
mounting flange
"CHIPOTLE" & PEPPER LOGO RACEWAY CABINETS
ELECTRICAL
FACE= 1/8" Aluminum- Attachment to frame via Versalok adhesive
PRIMARY= 120V electrical to sign and final hook up is by others (leave
Note: faces overhang ends of frame typ.
V-0" pigtail out back of raceway typ.)
RETURNS= @ ends/corners- 1/8" Alum. spot weld and Versalok to face
SECONDARY= 12V LED wire leads jumped in raceway. 12V LED
BACK= .040" Alum.- Rivet or screw to back of frame as req.
transformers mounted in raceway (mount in top sq.
FRAME= 2 1/2" x 1/8" Aluminum sq. tube w/ 1" x 2" x 1/8" alum. brace
tube for "CHIPOTLE" and Pepper logo raceway
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of frame.
cabinet)
Attach 1/4" steel angle lift clips to top of cab. w/ 3/8" bolts
POWER DISCONNECT= Toggle switch on end of raceway/ raceway
MOUNTING= Mount to existing fascia w/ 3/8 lag bolts through face/ frame cabinet
(Heyco plugs required in cabinet face)
NOTE: See sheet #1.1 for electrical details
- Power
supply to
signand
final hook
up is by
others typ
letter Channel +-(I+ j
Raceway
cabinet
L 7 r
4 END SECTION
1.0 SCALE: 1 1/2"= f' -_O_ -
Counter sunk screws
Channel letter
for attachment of
w/ LEDs
.090" alum. lid
1/8" alum. cross
Gasket req.
brace- rivet/glue
to raceway
t
.040" alum. flange-
nvet/glue to race
way
a
s
Brake Formed 1/8"
—
�"
alum. raceway
flange- rivet/
LED
controller
Power in, and final hookup
is by others typ.
- Power
supply to
signand
final hook
up is by
others typ
letter Channel +-(I+ j
Raceway
cabinet
L 7 r
4 END SECTION
1.0 SCALE: 1 1/2"= f' -_O_ -
rivet/glue to
raceway typ.
5 "MEXICAN GRILL" RACEWAY SECTION
1.0 NOT TO SCALE
COLOR SPECIFICATIONS
P1 P.T.M. PMS #484C "Roasted Red" (Nuance) NOTE: Paint all exposed
fasteners and Heyco caps
P2 P.T.M. PMS #4625C "Adobo Brown" (Nuance) to match adjacent finish
P3 P.T.M. Existing fascia- Exact color TBD
C _
Advertising Concepts Inc.
3725 Canal Drive,
Fort Collins, CO 80524
970 484 3637
www.adcon-signs.com
These tluewntm i ami plans have lite" vVided by and
are IheexcEtsive mlClivchal p gcrly of MOO lot AoY
unauhNind use. dis:losurr• disse nlnaiion or dnipl.
cation of any of the information contained herein may
result in liabil,ly under applicable laws
Design Proposal for.
Chipotle Mexican Grill
**Location**
Sign Type: A-1
Date:
Drawn by: Skip W.
Account Manager: Rob K.
Project Manager:
Design/ Estimate M.—
File
._File Name:. A-1
Client Approval
Signature
Lane
NOTE: Please ensure all red line changes are noted on
this drac:ing prior to reforming if to ADCON. Sutse;u enl to
ADCON incorpomhng the red line changes re-, i0 on
(his drawing any further changes till result in additional
billing al the rale of 586 per hour.
❑ Approved
❑ Approved As Noted
❑ Revise And Resubmit
Production Mgr. Approval Date
Project Mgr. Approval Date
Account Mgr. Approval Date
P&D Mgr. Approval Date
Revision Notes:
Sea. No. 0 *TBD*
W.O. No. 0000000
Date:
Rev. No. A By:
Sheet No. 1.0
Counter sunk screws
for attachment of
.090" alum. lid
Gasket req.
a
.040" alum.
�"
flange- rivet/
glue to race
way
114'
Brake formed
1/8" brake
1/8" alum.
t
formed alum.
raceway
cross brace-
rivet/glue to
raceway typ.
5 "MEXICAN GRILL" RACEWAY SECTION
1.0 NOT TO SCALE
COLOR SPECIFICATIONS
P1 P.T.M. PMS #484C "Roasted Red" (Nuance) NOTE: Paint all exposed
fasteners and Heyco caps
P2 P.T.M. PMS #4625C "Adobo Brown" (Nuance) to match adjacent finish
P3 P.T.M. Existing fascia- Exact color TBD
C _
Advertising Concepts Inc.
3725 Canal Drive,
Fort Collins, CO 80524
970 484 3637
www.adcon-signs.com
These tluewntm i ami plans have lite" vVided by and
are IheexcEtsive mlClivchal p gcrly of MOO lot AoY
unauhNind use. dis:losurr• disse nlnaiion or dnipl.
cation of any of the information contained herein may
result in liabil,ly under applicable laws
Design Proposal for.
Chipotle Mexican Grill
**Location**
Sign Type: A-1
Date:
Drawn by: Skip W.
Account Manager: Rob K.
Project Manager:
Design/ Estimate M.—
File
._File Name:. A-1
Client Approval
Signature
Lane
NOTE: Please ensure all red line changes are noted on
this drac:ing prior to reforming if to ADCON. Sutse;u enl to
ADCON incorpomhng the red line changes re-, i0 on
(his drawing any further changes till result in additional
billing al the rale of 586 per hour.
❑ Approved
❑ Approved As Noted
❑ Revise And Resubmit
Production Mgr. Approval Date
Project Mgr. Approval Date
Account Mgr. Approval Date
P&D Mgr. Approval Date
Revision Notes:
Sea. No. 0 *TBD*
W.O. No. 0000000
Date:
Rev. No. A By:
Sheet No. 1.0
Z-2 3/4 "
FRONT ELEVATION
13'-0 1/2"
8'-0 1/2"
05)
V-2"
0'-2 5/8" d
0'-3" 1
0
P3
V-4
=--
1 0, ' 0'-7„
'�—
-" Power disconnect
switch
- 2'-2 314 " - - --- 10'-7 1/2" -
V-5 7/16" - 9'-10 5/32" -
1"n�lu -(frame)1 1/41 1/4" typ. typ. 2" 1" x 2" x rec. tube race ---
3 CABINET FRAME DETAIL
1.0 SCALE: 1/2"= V-0" -
Removable
lift clip
ContinuouKIM (sectioned
1/8" alum. w/ gasket
1/8" Alum.
Face
Heyco
cap
LED contr
2 112" sq. tube frame
w/recianqular holes
cut in top for service
access
2 END VIEW 3/8" Fasteners as req.
1.0 SCALE: Removable lift clip
Continuous (sectioned)
1/8" alum. lid w. gasket -a--�
Continuous (sectioned) 1/8"
alum. lid w/ gasket
Power disconnect switch
Ends of 1/8" Alum.
face overhang frame
1/8" Alum. return @
corners/ends (glue to
face overhang)
2 1/2" x 2 1/2" x 1/8"
Alum. sq. tube frame
Mounting holes (typ.)
SPECIFICATIONS FOR (1) ILLUMINATED CHANNEL LETTER SIGN (42 SO. FT.)
0 CHANNEL LETTERS "CHIPQTLE" PEPPER LOGO and "MEXICAN GRILL"
0 "MEXICAN GRILL" RACEWAYS '
LETTER TYPE= Face -Lit pan channel letters
CONSTRUCTION= 1/8" brake -formed aluminum w/ continuous top
DEPTH= 3"
FACES= Pepper Logo= 3/4" Clear acrylic w/ recessed graphics (see
mounting flange and brake formed cross braces.
.090" alum. lid sits atop .040" lid mounting flanges
sheet #1.2 for construction details)
and is attached w/ counter sunk screws into cross
All others= 3/16" Cyro #2447 Milk -White acrylic
braces. Seal and gasket raceway to make water tight.
TRIMCAP= 1" Brown Jewelite
ACCESS= Removal of aluminum lid(s)
BACKS= .040" Pre -finished white aluminum
RETURNS= .040" Pre -finished Adobo Brown aluminum (w/ weep holes)
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of
cross braces Attach 1/4" steel angle lift clips w/ 3/8" bolts
ILLUMINATION= White Agilite Thin Rayz LEDs
MOUNTING= Mount to existing fascia w/ 3/8 fasteners (as req.) through
MOUNTING= Mount to face of raceway with #10 Tek screws as req.
mounting flange
0 "CHIPOTLE" & PEPPER LOGO RACEWAY CABINETS
FACE= 1/8" Aluminum -Attachment to frame via Versalok adhesive
Note: faces overhang ends of frame typ.
ELECTRICAL
PRIMARY= 120V electrical to sign and final hook up is by others (leave
RETURNS= @ ends/corners- 1/8" Alum. spot weld and Versalok to face
6'-0" pigtail out back of raceway typ.)
BACK= .040" Alum.- Rivet or screw to back of frame as req.
SECONDARY= 12V LED wire leads jumped in raceway. 12V LED
transformers mounted in raceway (mount in top sq.
FRAME= 2 1/2" x 1/8" Aluminum sq. tube w/ 1" x 2" x 1/8" alum. brace
tube for "CHIPQTLE" and Pepper logo raceway
LIFT CLIPS= 1/4" Steel plate w/ welded 3/8" nut glued to inside of frame.
cabinet)
Attach 1/4" steel angle lift clips to top of cab. w/ 3/8" bolts
POWER DISCONNECT= Toggle switch on end of raceway/ raceway
MOUNTING= Mount to existing fascia w/ 318 lag bolts through face/ frame
cabinet
(Heyco plugs required in cabinet face)
NOTE: See sheet #1.1 for electrical details
Channel letter —
w/ LEDs
1/8" alum. cross -- --�
brace- rivet/glue
to raceway
.046" aluni flange-
riveVglue to race
way
Brake formed 1/8"
alum. raceway
LED controller
Power in, and final
is by others typ.
Counter sunk screws
for attachment of
.090" alum. lid
Gasket req.
alum.
flange- rivet/
glue to race
way
Power
supply to
signand
final hook
up is by
others typ.
4 END SECTION
1.0 SCALE: 1 1/2"= V-0"
Brake formed 1/8" brake
1/8" alum. formed alum.
raceway cross brace-
rivet/glue to
raceway typ.
5 "MEXICAN GRILL" RACEWAY SECTION
1.0 NOT TO SCALE
COLOR SPECIFICATIONS
P1 P.T.M. PMS #484C "Roasted Red" (Nuance) NOTE: Paint all exposed
fasteners and Heyco caps
P2 P.T.M. PMS #4625C "Adobo Brown" (Nuance) to match adjacent finish
P3 P.T.M. Existing fascia- Exact color TBD
Advertising Concepts Inc.
3725 Canal Drive,
Fort Collins, CO 80524
970 484 3637
www.adcon-signs.com
mese doeumcn:s and pl," hart pcar crexrd by ala
are the exclusivemh:11aelunl prWlpal Adcon pro Any
unauthorized use, dlwWwc. dlsaerminalion or duplr
ration of any of mo +nlnrmalm contained hcrelg uray
result in liability under applicable laws
Design Proposal for.
Chipotle Mexican Grill
*"Location*"
Sign Type: A-1
Drawn by: SkiD W
Account Manager: Rob K
Project Manager:
Design/ Estimate #:
File Name: A-1
Client Approval
Signature
Dale
NOTE: Please ensure all red line changes are noted on
[his drawing prior to returning lt to ADCON. Subsequent to
ADCON incorporating the red line changes requested on
this drawing any further changes will result in additional
billing at the rate of $B6 per hour.
❑ Approved
❑ Approved As Noted
❑ Revise And Resubmit
Production Mgr. Approval Date
Project Mgr. Approval Dale
Account Mgr. Approval Date
P&D Mgr. Approval Date
Revision Notes:
Sea, No. 0 *TBD*
W.O. No. 0000000
Date
Rev. No. A By: _
Sheet No. 1.0