HomeMy WebLinkAboutemail Banihatti Henry on designMalone, Walter
From: Banihatti, Nat
Sent: Wednesday, January 08, 2014 11:07 AM
To: Malone, Walter
Subject: RE: Roundabouts - PW Input
No, we don't need to add anything else. It is fine the way it is shown.
-Nat
-----Original Message -----
From: Malone, Walter
Sent: Wednesday, January 08, 2014 11:03 AM
To: Banihatti, Nat
Subject: RE: Roundabouts - PW Input
So, do we need some of the terms further defined? If so please give me those definitions.
Thanks
-----Original Message -----
From: Banihatti, Nat
Sent: Wednesday, January 08, 2014 11:01 AM
To: Malone, Walter; Floriani, Vince
Subject: FW: Roundabouts - PW Input
-----Original Message -----
From: Henry, Bill
Sent: Wednesday, January 08, 2014 10:54 AM
To: Banihatti, Nat
Subject: RE: Roundabouts - PW Input
The design should be via the design guide information. It is fine as shown and just explains the terminologies.
William Henry, P.E.
Traffic Engineering Manager
City of Little Rock Public Works Traffic Engineering
621 S. Broadway
Little Rock, AR 72201
501-379-1816 office
501-340-4853 fax
-----Original Message -----
From: Banihatti, Nat
Sent: Wednesday, January 08, 2014 10:33 AM
To: Henry, Bill
Cc: Floriani, Vince; Malone, Walter
Subject: FW: Roundabouts - PW Input
1
Bill:
Since the dimensions vary so much based on the diameter and the number of lanes, I don't think there is a need to show
any minimum widths on the MSP. It will have to be reviewed when they submit the design. What are your thoughts on
this?
-Nat
-----Original Message -----
From: Malone, Walter
Sent: Wednesday, January 08, 2014 10:13 AM
To: Banihatti, Nat
Cc: Floriani, Vince
Subject: RE: Roundabouts - PW Input
Here is a cleaned -up version based on the comments. Did we get everything correct? If not, please let me know what
further changes should be made. Also we had a comment from a local engineer that asked if we could at least but
number ranges on the graphic for some of the dimensions. If so what would those ranges be?
Walter
-----Original Message -----
From: Banihatti, Nat
Sent: Monday, January 06, 2014 2:47 PM
To: Hulsey, Sue; Herbner, Travis
Cc: Malone, Walter
Subject: RE: Roundabouts - PW Input
Walter,
Your changes are OK to include.
Thanks
-Nat
-----Original Message -----
From: Hulsey, Sue
Sent: Monday, January 06, 2014 12:17 PM
To: Banihatti, Nat; Herbner, Travis
Cc: Malone, Walter
Subject: FW: Roundabouts - PW Input
Gentlemen - please see Walter's response/question below - is the handwriting on the graphic yours, Nat?
And - copying Walter to ask that Yield be spelled "I" before "e", please. LOLI
Sue Hulsey
371-4475
-----Original Message -----
From: Malone, Walter
Sent: Monday, January 06, 2014 11:47 AM
To: Hulsey, Sue
Subject: RE: Roundabouts - PW Input
z
Sue,
I just wanted to clarify the comments. The first one is to change the Yeild marking at each entry to the line drawn on the
top of the page. The second is to modify each of the channelizing island entrances to the roundabout to be one thing
just the island and curbing no marked area beyond the island. If this is correct we will make the changes.
Thanks
Walter
-----Original Message -----
From: Hulsey, Sue
Sent: Monday, January 06, 2014 11:31 AM
To: Malone, Walter
Subject: Roundabouts - PW Input